HomeBusinessWhat You Need to Know About Street Lighting Installation

What You Need to Know About Street Lighting Installation

There are many different types of street lighting available. You’ll find information on Arc, DIALUX, and Solar, as well as other options like precast concrete. There’s also an important consideration for the height of the street lamps. Depending on the importance of the road, the distance between street lights should be between 35 and 55 meters. If you’re unsure of the height and spacing of street lamps in your area, consult an expert.


If you are a beginner in street lighting installation, you can learn all about the different components of a DIALUX system. Among these are cove lighting, lamppost, and street lamp. You will also learn about the proper installation and maintenance of LED and CFL bulbs. Depending on your area, the height of street lights will vary from eight to fifty feet. This distance is necessary to provide good illumination for the street.

DIALUX software is developed by the German Institute for Applied Lighting Technology and provides an easy-to-use platform for the promotion of various luminaires. Lighting manufacturers pay to have their products showcased in the DIALux database, which contains photometric and 3D models of the various luminaires. Using this software, you can visualize the lighting fixtures, their functionality, and how much energy they will use.


If you’re thinking of installing solar street lighting on your property, you’ll first need to know how to set up the lights. You can use a large cloth to level the area, and attach the pole and solar panels to the bracket. Once the bracket and solar panels are mounted, you’ll need to connect the cables to the pole and power source, then tighten the mounting bolts to secure them. Next, check the angle of the solar panels to ensure that they’re level.

When installing a solar street light, the ground needs to be level and ideally, you’ll want to install the solar panel on a flat surface. You’ll also want to install a basic cage parallel to the road edge, which will serve as the foundation. Once the pole has been set, lift the solar panel about a meter or so and attach the brackets to the pole. Lastly, connect the street light to the solar panel and battery using four screws.


The concept of arc street lighting first emerged during the Exposition Universelle in Paris in 1878. This lighting system used a dynamo to power arc lamps and was the first commercially available lighting system in the United States. Later, the same technology was applied to street lighting in the European continent, and many cities followed suit, installing Brush arc lights in their streets. But, even in the 1880s, the technology was still a bit rudimentary, and regular maintenance by technicians was necessary.

The earliest street lighting systems were arc lamps, which used alternating current to ensure equal consumption of the electrodes. In 1876, the common council of the City of Los Angeles ordered four arc lights. These arc lights became obsolete by the mid-20th century, but they still serve a purpose in many areas. Arc lighting installed on public streets is an excellent alternative to conventional light fixtures. It is easy to install and has many advantages.

Read Also: 7 Amazing Facts about Traffic Lights

Precast concrete

One of the biggest advantages of using precast concrete for street lighting installation is the dramatic reduction in labor and material costs. Precast concrete footings eliminate the need for traditional cement bases that require curing time. By eliminating the need for these bases, street lighting installation can be completed in a fraction of the time. In addition, these footings can be used to install additional lighting in the future. Here are some other benefits of using precast concrete for street lighting installation:

Pole Base: Light pole bases are precast in a controlled environment and are made to fit a specific size. The process is usually completed in seven to fourteen days, but sometimes more depending on weather conditions or scheduling conflicts between trades. In some instances, a pole base can be installed in a matter of hours and only requires a single crew. The Pole Base is available in six different textures to suit any location. Precast concrete also makes the installation process less time-consuming than other materials.

Intelligent controllers

The first step towards implementing an intelligent streetlight system is to understand the characteristics of streetlights. Smart streetlights would be able to coordinate the behavior of animals on the street and collect data about their environment. This data would be collected and communicated with a control management system. During testing, the prototype system consisted of full equipped nodes distributed throughout the luminaries of a section. This research is ongoing to improve the design and performance of intelligent streetlight systems.

The advantages of intelligent streetlight controllers include remote switching and dimming, and the ability to automate a group of streetlights or a single light. These controllers are a great tool to cut energy costs while ensuring basic illumination and maximizing energy efficiency. They also allow for unattended work. Data collected from the system include working voltage and current and alarm information, which are then uploaded to a server for analysis. The data collected can be used to plan future lighting and notify maintenance personnel when necessary.


The height of the pole at which to install your lights is vital. For urban streets, the minimum distance from the curb is 0.3 meters, while for rural roads it is 0.6 meters, 1.5 meters, or 5.0 meters. Aim for a height of six to 10 meters for optimal output. In addition to determining the correct height, planners should also consider the presence of other structures, such as trees and power lines, that might pose a hazard. For this reason, they may need to move the poles to the desired height.

To install a pole, make sure you have the right soil. If you’re planning to install a pole in an area that doesn’t have underground utilities, the soil must be suitable for the pole’s mounting. The type of soil will also affect the cost. Once the base plate has been properly installed, tighten the anchor bolts and then place the pole on the leveling nuts and washers. Once the pole is level, tighten the anchor bolts to prevent excessive stress on the pole.



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments