HomeTechHow do I fix my Canon mx432 printer error?

How do I fix my Canon mx432 printer error?

The Canon pixma IP2702 Error Code b200 states a fault in the ink carriage. In essence, something is acting up against the carriage. This means that Error Code 5100 may be related to a carriage issue. It is easily remediated through service mode, wiping the heads of the printer in case of an issue. So, if you have the same problem with your Canon printing device, you shouldn’t fret for a second! This blog will help you get rid of this problem with ease. If these guidelines do not work for you, you could easily get an honest and reliable Canon Help in the comfort of your house. By doing this, you will receive a single-stop solution for the exact printer issues.

Causes of the Error Code: 5100 Canon MX472 Printer

There are a variety of reasons that can lead you to Canon PIXMA Printer Error 5100. The most frequent reasons are:

  • The protective material may be looking over the head of the printer.
  • It could be a paper jam problem
  • Because of debris in the head of the carriage
  • Because it was not properly set up, the ink tank correctly
  • The printer has to be reset

These are the most common mistakes on your Canon printer and will display an error message 5100. When you face this issue, you’ll be unable to print any documents. This is why it’s immediately necessary to address the issues. Be aware of the troubleshooting procedure in the following points.

Efficacious Solutions To Fix Error Code 5100 Canon MX472 Printer

Here are some reliable methods to solve the problem based on the root causes of Canon printer error Code 5100. Let’s take an overview of them and then follow them one by one:

Solutions 1: Eliminate the Productive Material from The Head of the Printer

  • To begin, lift the cover on top of your printer.
  • Look for the protective material and then take it off. it
  • Close the cover and switch on your printer.
  • Examine whether Canon PIXMA Printer Error Code 5100 is gone or isn’t.

You must clear the jammed paper to eliminate the error if you still get the same error message when printing your document.

Solutions 2: Removed the jammed paper from your Canon printer

  • Before beginning to wash up the paper jammed, switch off your printer first.
  • Then, lift the cover on top and search for any jammed paper. If you find any, take it out immediately.
  • Remove it gently, pulling it from the tray
  • Close the cover, then switch your printer on.
  • Confirm that the issue has been solved

Solution 3. Set the Ink Cartridges Correctly

Sometimes, the Error code 5100 canon pixma mx432 printer’s ink cartridge may not be correctly installed or set up, resulting in an error 5100. This error can cause interruptions of the printing head’s function. To solve this issue, resetting or reinstalling the cartridges in the inkjet printer is necessary. To do this, remove all cartridges in your printer and then cleanse them thoroughly.

Solution 4: Reset Your Canon MX472 Printer

  • First, turn off the printer before unplugging your power supply cable to the wall outlet
  • Then, press while holding your “Power” button to restore power.
  • While you hold the power button while holding the power button, press the Resume button two times.
  • Press the power button to check if the issue has been solved.

Dial Canon Support for Quality Support

If you cannot eliminate the error code 5100, the next but certainly not the least choice is to seek reliable help from highly skilled techs. You’ll have to make a phone call to the Canon support numberand connect with them. Do not leave the call with technical support until you have the correct procedure for troubleshooting.



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments